1. Crescent - Salerno Italia 2. Crescent - Salerno Italia 3. Crescent - Salerno Italia 4. Crescent - Salerno Italia 5. Crescent - Salerno Italia 6. Crescent - Salerno Italia

Crescent


Condor CRESCENT involved with the construction of the ambitious process of upgrading the entire area of the commercial port and the marina Masuccio Salerno. The building is a real scenic backdrop behind the Liberty Square and is divided into six areas. A work of urban transformation that will house shops, offices, parking lots and apartments and welcome the growing number of tourists coming from the sea. A " crescent " of 2,000 square meters (hence the name Crescent ).

Technical Support

Technical Support

Engineer Anthony Annunziata, Project Manager

" The shuttering VESTO stand and were chosen for the Crescent for modularity, versatility and performance capacity. They respond perfectly to the needs of safety and efficiency in terms of use. For continuous use, with an average of one jet per day, has allowed the yard to reduce considerably the time of application for the construction of the work. "

Used products

  • Coffrage Vesto

    Coffrage Vesto

    Les coffrages de voiles Vesto ont été utilisés pour les murs monoface des niveaux sous-sols, pour cage d'escalier et cage d'ascenseur, pour cloisons transversales garage et pour les piliers. Parmi les nombreux coffrages Condor, les VESTO se distinguent et ont été choisis pour le Crescent pour modularité, polyvalence et capacité de performance. répondre parfaitement aux besoins de sécurité et d'efficacité en termes d'utilisation. L'utilisation continue, avec une moyenne d'un jet par jour, a permis à la cour de réduire considérablement le temps d'application pour les travaux de construction.
    Les accessoires permettent également au système de coffrage peut être utilisé dans n'importe quelle application et le stade de travail en toute sécurité: des étagères de bois métallique, trappes de monté en sécurité, garde–corps et les étais de stabilisation.

  • Scaffolding frame Galvanized

    Scaffolding frame Galvanized

    La modularità (da 1,80 m e 2,50 m) del ponteggio CONDOR a telaio zincato ha permesso di far fronte alle diverse esigenze di cantiere dettate, in special modo, dalla particolare forma degli edifici.

  • Towers of Multidirectional flow to support floors Predalles

    Towers of Multidirectional flow to support floors Predalles

    The columns, made with prefabricated structures in face view, being placed in work already assembled required a system plumb and support that one part was of non-invasive (no anchor points or fixing ) and the other which had characteristics of lightness and safety. CONDOR The towers have responded to this need by allowing two operators to pre-assembly of the columns themselves operate in freedom of movement and always in complete safety.

  • Vesto Formwork

    Vesto Formwork

    The formwork wall Vesto have been used for single-sided walls of basements, for septa stairwell and elevator shaft, for transverse septa car garage and for the pillars. Among the many wall formwork Condor, the VESTO stand and were chosen for the Crescent for modularity, versatility and performance capacity. Perfectly meet the needs of safety and efficiency in terms of use. Continuous use, with an average of one jet per day, has allowed the yard to reduce considerably the time of application for the construction work. I dress accessories also allow the formwork system can be used in any application and stage of work in total safety : Timber metal shelves, hatches climbs in security, guard and props stabilization.